- With temperature control function (150 ˚C) and timer function
- With electronic control function including giving designation
- Current (LD)
- Single cavity oven design, the box can carry 10 sets of baking trays, each tray can carry 64 VCSEL products, up to 640 VCSEL products
- Built-in monitoring output current and voltage measurement. Real-time records can be made on each board mounted
- A conversion board that provides flexible pin switching.
- A test board that can be used with other test machines of Zequn Technology
-
-
- With temperature control function (150C) and timing function
- With electronic control function including giving specified current (LD)
- Features dual oven chambers, each chamber can hold 16 test pans, each pan can hold 64 TO56 products, up to 2,048 TO56 products
- Can realize individual parameter setting and start, end time and so on. Each board can be used for testing records
- Use the conversion board to facilitate pin switching, the default Type C (2.5G) pin
- Provides LD drive current setting to light up the laser diode, and provides the bias value of the internal photo sensor (mPD) with constant voltage setting
- Controlled by computer, individual Im channels can be monitored, monitoring time interval can be set, data storage and display, and data upload. The Ith value can be calculated from the Im value and the changes can be observed
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
-
- The pin is made of gold-plated copper tube, which has low contact resistance, is not easy to oxidize, and has a long service life
- The main material is high-purity, high temperature resistant (110°C, 220°C can be customized for special requirements) insulating plastic, good insulation between pins, and high reliability of test results
- The inner hole of the pin is a through hole, and the length of the tested laser diode pins can be used universally.
- The pins of the TO-CAN using this header will not be bent, and have a corrective effect on the bent ones, ensuring a good appearance
